BPPXL - 240 CUTTING OIL
- MSDS: BPPXL
- Manufacturer: DOALL CO
- Product Name: 240 CUTTING OIL
- National Stock Number: 9150-00N031834
Product Identification
Product ID:240 CUTTING OIL
MSDS Date:07/11/1986
FSC:9150
NIIN:00N031834
MSDS Number: BPPXL
Responsible Party
DES PLAINES, IL 60016
US
Emergency Phone: 708-824-1122
Info Phone: 708-824-1122
Preparer: R.R. ROGERS
Cage: 18056
Contractor
Telephone: 847-803-7366
Cage: 18056
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 89%
OSHA PEL 5 MG/M3 MIST(MFR)
ACGIH TLV: 5 MG/M3 MIST(MFR)
SOLVENTS. LAUNDER SOAKED CLOTHING BEFORE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:(OF MIST) IRRITATION,
DIFFICULTY BREATHING. EYES: SLIGHT IRRITATION. SKIN: MILD
IRRITATION, DEFATTING OVER PROLONGED OVEREXPOSURE. INGEST: POSSIBLE
NAUSEA,DIARRHEA. CHRONIC: INHALATION OF MIST: PETROLEUM
PNEUMONITIS. SKIN: DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING DISORDERS OF EYE &
SKIN(LIQ CONT), RESPIRATORY SYS(INHALING MIST), G.I. TRACT
(SWALLOWING LIQUID).
First Aid
First Aid:INHAL(AS MIST): REMOVE TO FRESH AIR. SUPPORT BRTHG &/OR GIVE
O2 IF NEC. KEEP QUIET & WARM. GET MED ATTN. EYES: REMOVE CONT
LENSES. HOLDING LIDS APART, FLUSH W/WATER FOR AT LEAST 15 MIN. IF
PERSISTANT IRRIT OCCURS, GET MED ATTN. SKIN: WASH EXPOSED AREA
W/MILD SOAP/ WARM H2O. DON'T USE HARSH SOLVENTS. INGEST: KEEP QUIET
& WARM. GET MED ADVICE BEFORE TAKING FURTHER ACTION.
Fire Fighting
Flash Point Method:COC
Flash Point:305F,152C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
STREAM/SPRAY USEFUL IN MINIMIZING VAP & COOLING CONTR. IF MATL
IGNITED, H2O STREAM MAY SPREAD (SUPP DATA)
Unusual Fire/Explosion Hazard:COMBUSTION CAN PRODUCE IRRITATING
COMPOUNDS OF CHLORINE AND SULFUR.
Accidental Release
Spill Release Procedures:CONFINE SPILL TO PREVENT ENTRY INTO SEWERS,
PUBLIC WATERWAYS, OR GROUND. LG SPILLS: SOAK UP ON INERT ABSORBENT.
SHOVEL INTO LIQUID TIGHT CONTAINER. SM SPILLS & RESIDUES: MOP WITH
STRONG SOAP AND HOT W ATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE @ NORMAL ROOM TEMPERATURES.
AVOID TEMPERATURE EXTREMES. STORE AWAY FROM LIKELY FIRE SOURCES.
Exposure Controls
Respiratory Protection:IF MIST TLV EXCEEDED: ANY NIOSH/MSHA APPROVED
SUPPLIED-AIR RESPIRATOR.
Ventilation:LOCAL EXHAUST TO CONTROL MIST TLV ONLY. MECH(GEN) IF MIST
TLV EXCEEDED: MIST COLLECTER >60 FT/MIN. VELOCITY.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Work Hygienic Practices:USE REASONABLE PERSONAL HYGIENE PRACTICES INCL
WASHING EXPOS SKIN W/MILD SOAP & WARM H2O. AVOID USE OF HARSH (ING
2)
Supplemental Safety and Health
FIRE FIGHT PROC:FIRE. FOG NOZ ARE PREF. WASTE DISP METH: PROD DOES NOT
MEET RCRA CRITERIA FOR HAZ SUBSTANCES. DO NOT DISPOSE OF PROD/MOP
H2O WASTE IN SEWERS, PUBLIC WATERWAYS/ON GROUND. DISPOSE OF AS
OILY WASTE(PROD & MOP H2O) I/A/W LOC, ST, & FED REGS AFTER
EVALUATING STATUS CHANGE RELATED TO POSS IN-USE CONTAMD.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:450F,232C
Vapor Density:>1
Spec Gravity:0.92(H2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN LIQUID WITH PETROLEUM ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAMES AND VERY HOT SURFACES.
Hazardous Decomposition Products:CO, CO2, COMPOUNDS OF CHLORINE &
SULFUR.
Disposal
Waste Disposal Methods:UNDER RCRA. IT IS THE RESPONSIBILITY OF USER OR
PROD TO DETERM, @ TIME OF DISP, WHETHER PROD MEETS RCRA CRITERIA
FOR HAZ WASTE. THIS IS BECAUSE PROD USES, TRANSFORMATIONS, MIX,
PROCESES, ETC., MAY REN DER RSLTG MATL NONHAZ/HAZ. AS
RECEIVED,(SUPP DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.